CONDOR POWER Industrial Partner

MAX-354-1205 - Condor Power MAX-354-1205 Power Supply Simple Type: Power Supply

larger image

Request Quote
For Price
Part Number:
MAX-354-1205
Model Number:
MAX-354-1205
Make:
CONDOR POWER
Lead Time:
Available
Qty In Stock:
Available

Condor Power MAX-354-1205 Power Supply Simple Type: Power Supply

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • None Available

Specifications

    General
  • Ac Input: 90-132 Vac/180-264 Vac, 47 to 63 Hz. User selectable. See option “A” for automatic line selection. Internally fused for 10 A.
  • Adjustability: User adjustable ±5% minimum.
  • Brownout Protection: Holds regulation to 85 Vac or 170 Vac.
  • Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B.
  • Cooling: 30 cfm required to achieve full ratings.
  • Efficiency: 80% typical.
  • Holdup Time: 16 ms minimum after removal of power, at nominal line, full load.
  • Inrush: Cold start ac current is less than 10 A at 115 Vac and 18 A at 230 Vac.
  • Line & Load Regulation: ±1% over ac input range and 0 to 100% load change. Output #1 requires minimum load of 10%.
  • Output Isolation: Isolated from ground 50 Vdc.
  • Overload Protection: All outputs are protected against overload and short circuit. Automatic recovery upon removal of fault.
  • Overvoltage Protection (Output #1): Protects load against power supply induced overvoltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal.
  • Remote Inhibit: Contact closure to the negative sense line drops output power to nominal zero.
  • Remote Sense (Output #1): Compensates for 250 mV total line drop. Open sense lead protection.
  • Reverse Voltage: Protected against reverse voltage up to supply current rating.
  • Ripple & Noise: Less than 1% p-p or 100 mV, whichever is greater.
  • Safety Agencies: Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÜV EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive).
  • Stability: 0.1% over 8 hours after 30 minutes warm-up.
  • Temperature Coefficient: 0.02% per degree C.
  • Temperature Range: 0° to 50°C at full ratings. Derate to half power at 70°C.
  • Thermal Protection: Shuts down power supply if overheated; Automatic recovery
  • Transient Response (Output #1): Output voltage returns to within 1% in less than 500 µs for a 50% load change. Peak transient does not exceed 5%.

 

Applications

  • None Available

Aliases

  • None Available